racerxdl / SatHelperApp.cfg
0 likes
0 forks
1 files
Last active 1 month ago
RTLSDR R820T2 SatHelperApp config
| 1 | Title = "SatHelperApp" |
| 2 | |
| 3 | [Base] |
| 4 | SymbolRate = 927000 |
| 5 | RRCAlpha = 0.3 |
| 6 | Mode = "hrit" |
| 7 | Decimation = 1 |
| 8 | AGCEnabled = true |
| 9 | DeviceType = "rtlsdr" |
| 10 | SendConstellation = true |
racerxdl / domain.xml
0 likes
0 forks
2 files
Last active 1 month ago
How to use Windows 10 OEM license in libvirt VM (<smbios mode='host' /> does not work as Windows seems to verify UUID; apparmor/security configuration changes may be needed)
| 1 | #!/bin/bash |
| 2 | |
| 3 | set -e |
| 4 | |
| 5 | cat /sys/firmware/acpi/tables/SLIC > slic.bin |
| 6 | cat /sys/firmware/acpi/tables/MSDM > msdm.bin |
| 7 | dmidecode -t 0 -u | grep $'^\t\t[^"]' | xargs -n1 | perl -lne 'printf "%c", hex($_)' > smbios_type_0.bin |
| 8 | dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin |
racerxdl / end-gcode.gcode
0 likes
0 forks
2 files
Last active 1 month ago
Cura GCode start / end for BLTouch + Ender 3 Pro
| 1 | ; Script based on an original created by tjjfvi (https://github.com/tjjfvi) |
| 2 | ; An up-to-date version of the tjjfvi's original script can be found |
| 3 | ; here: https://csi.t6.fyi/ |
| 4 | ; Note - This script will only work in Cura V4.2 and above! |
| 5 | ; --- Global Settings |
| 6 | ; layer_height = {layer_height} |
| 7 | ; smooth_spiralized_contours = {smooth_spiralized_contours} |
| 8 | ; magic_mesh_surface_mode = {magic_mesh_surface_mode} |
| 9 | ; machine_extruder_count = {machine_extruder_count} |
| 10 | ; --- Single Extruder Settings |
racerxdl / SatHelperApp.cfg
0 likes
0 forks
1 files
Last active 1 month ago
RTLSDR E4000 config for SatHelperApp
| 1 | Title = "SatHelperApp" |
| 2 | |
| 3 | [Base] |
| 4 | SymbolRate = 927000 |
| 5 | RRCAlpha = 0.3 |
| 6 | Mode = "hrit" |
| 7 | Decimation = 1 |
| 8 | AGCEnabled = true |
| 9 | DeviceType = "rtlsdr" |
| 10 | SendConstellation = true |
racerxdl / bands.json
0 likes
0 forks
3 files
Last active 1 month ago
OpenWebRX at https://websdr.lucasteske.dev/
| 1 | # -*- coding: utf-8 -*- |
| 2 | |
| 3 | """ |
| 4 | config_webrx: configuration options for OpenWebRX |
| 5 | |
| 6 | This file is part of OpenWebRX, |
| 7 | an open-source SDR receiver software with a web UI. |
| 8 | Copyright (c) 2013-2015 by Andras Retzler <[email protected]> |
| 9 | Copyright (c) 2019-2020 by Jakob Ketterl <[email protected]> |
racerxdl / Configuration.h
0 likes
0 forks
3 files
Last active 1 month ago
Ender 3 Pro - SKR v1.4 Pro with BLTouch - Marlin 2.0.0
| 1 | /** |
| 2 | * Marlin 3D Printer Firmware |
| 3 | * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] |
| 4 | * |
| 5 | * Based on Sprinter and grbl. |
| 6 | * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
| 7 | * |
| 8 | * This program is free software: you can redistribute it and/or modify |
| 9 | * it under the terms of the GNU General Public License as published by |
| 10 | * the Free Software Foundation, either version 3 of the License, or |
racerxdl / vcd2latex.py
0 likes
0 forks
1 files
Last active 1 month ago
Very bad converter from ValueChangeDump (VCD) to Tikz Timing on Latex.
| 1 | #!/usr/bin/env python3 |
| 2 | |
| 3 | import vcdvcd, math |
| 4 | from vcdvcd import VCDVCD |
| 5 | |
| 6 | vcdfile = "digital_port_tb.vcd" |
| 7 | |
| 8 | vcd = VCDVCD(vcdfile, only_sigs=True) |
| 9 | |
| 10 | all_signals = vcd.signals |
racerxdl / create-hotspot.md
0 likes
0 forks
1 files
Last active 1 month ago
Create Wi-Fi Hotspot on Linux using nmcli
Create a Wi-Fi hotspot on Linux using nmcli
Original post : https://unix.stackexchange.com/a/310699
nmcli con add type wifi ifname wlan0 con-name Hostspot autoconnect yes ssid Hostspot
nmcli con modify Hostspot 802-11-wireless.mode ap 802-11-wireless.band bg ipv4.method shared
nmcli con modify Hostspot wifi-sec.key-mgmt wpa-psk
nmcli con modify Hostspot wifi-sec.psk "veryveryhardpassword1234"