Me gusta 0
Bifurcar 0

Última actividad 1 month ago

OpenWebRX at https://websdr.lucasteske.dev/

racerxdl's Avatar Lucas Teske revisó este gist 5 years ago. Ir a la revisión

3 files changed, 533 insertions

bands.json(archivo creado)

@@ -0,0 +1,269 @@
1 + [
2 + {
3 + "name": "160m",
4 + "lower_bound": 1810000,
5 + "upper_bound": 2000000,
6 + "frequencies": {
7 + "bpsk31": 1838000,
8 + "ft8": 1840000,
9 + "wspr": 1836600,
10 + "jt65": 1838000,
11 + "jt9": 1839000,
12 + "js8": 1842000
13 + }
14 + },
15 + {
16 + "name": "80m",
17 + "lower_bound": 3500000,
18 + "upper_bound": 3800000,
19 + "frequencies": {
20 + "bpsk31": 3580000,
21 + "ft8": 3573000,
22 + "wspr": 3592600,
23 + "jt65": 3570000,
24 + "jt9": 3572000,
25 + "ft4": [3568000, 3575000],
26 + "js8": 3578000
27 + }
28 + },
29 + {
30 + "name": "60m",
31 + "lower_bound": 5351500,
32 + "upper_bound": 5366500,
33 + "frequencies": {
34 + "ft8": 5357000,
35 + "wspr": 5364700
36 + }
37 + },
38 + {
39 + "name": "40m",
40 + "lower_bound": 7000000,
41 + "upper_bound": 7200000,
42 + "frequencies": {
43 + "bpsk31": 7040000,
44 + "ft8": 7074000,
45 + "wspr": 7038600,
46 + "jt65": 7076000,
47 + "jt9": 7078000,
48 + "ft4": 7047500,
49 + "js8": 7078000
50 + }
51 + },
52 + {
53 + "name": "30m",
54 + "lower_bound": 10100000,
55 + "upper_bound": 10150000,
56 + "frequencies": {
57 + "bpsk31": 10141000,
58 + "ft8": 10136000,
59 + "wspr": 10138700,
60 + "jt65": 10138000,
61 + "jt9": 10140000,
62 + "ft4": 10140000,
63 + "js8": 10130000
64 + }
65 + },
66 + {
67 + "name": "20m",
68 + "lower_bound": 14000000,
69 + "upper_bound": 14350000,
70 + "frequencies": {
71 + "bpsk31": 14070000,
72 + "ft8": 14074000,
73 + "wspr": 14095600,
74 + "jt65": 14076000,
75 + "jt9": 14078000,
76 + "ft4": 14080000,
77 + "js8": 14078000
78 + }
79 + },
80 + {
81 + "name": "17m",
82 + "lower_bound": 18068000,
83 + "upper_bound": 18168000,
84 + "frequencies": {
85 + "bpsk31": 18098000,
86 + "ft8": 18100000,
87 + "wspr": 18104600,
88 + "jt65": 18102000,
89 + "jt9": 18104000,
90 + "ft4": 18104000,
91 + "js8": 18104000
92 + }
93 + },
94 + {
95 + "name": "15m",
96 + "lower_bound": 21000000,
97 + "upper_bound": 21450000,
98 + "frequencies": {
99 + "bpsk31": 21070000,
100 + "ft8": 21074000,
101 + "wspr": 21094600,
102 + "jt65": 21076000,
103 + "jt9": 21078000,
104 + "ft4": 21140000,
105 + "js8": 21078000
106 + }
107 + },
108 + {
109 + "name": "12m",
110 + "lower_bound": 24890000,
111 + "upper_bound": 24990000,
112 + "frequencies": {
113 + "bpsk31": 24920000,
114 + "ft8": 24915000,
115 + "wspr": 24924600,
116 + "jt65": 24917000,
117 + "jt9": 24919000,
118 + "ft4": 24919000,
119 + "js8": 24922000
120 + }
121 + },
122 + {
123 + "name": "10m",
124 + "lower_bound": 28000000,
125 + "upper_bound": 29700000,
126 + "frequencies": {
127 + "bpsk31": [28070000, 28120000],
128 + "ft8": 28074000,
129 + "wspr": 28124600,
130 + "jt65": 28076000,
131 + "jt9": 28078000,
132 + "ft4": 28180000,
133 + "js8": 28078000
134 + }
135 + },
136 + {
137 + "name": "6m",
138 + "lower_bound": 50030000,
139 + "upper_bound": 51000000,
140 + "frequencies": {
141 + "bpsk31": 50305000,
142 + "ft8": 50313000,
143 + "wspr": 50293000,
144 + "jt65": 50310000,
145 + "jt9": 50312000,
146 + "ft4": 50318000,
147 + "js8": 50318000
148 + }
149 + },
150 + {
151 + "name": "4m",
152 + "lower_bound": 70150000,
153 + "upper_bound": 70200000,
154 + "frequencies": {
155 + "wspr": 70091000
156 + }
157 + },
158 + {
159 + "name": "2m",
160 + "lower_bound": 144000000,
161 + "upper_bound": 148000000,
162 + "frequencies": {
163 + "packet": 145570000
164 + }
165 + },
166 + {
167 + "name": "70cm",
168 + "lower_bound": 430000000,
169 + "upper_bound": 440000000,
170 + "frequencies": {
171 + "pocsag": 439987500
172 + }
173 + },
174 + {
175 + "name": "23cm",
176 + "lower_bound": 1240000000,
177 + "upper_bound": 1300000000
178 + },
179 + {
180 + "name": "13cm",
181 + "lower_bound": 2320000000,
182 + "upper_bound": 2450000000
183 + },
184 + {
185 + "name": "9cm",
186 + "lower_bound": 3400000000,
187 + "upper_bound": 3475000000
188 + },
189 + {
190 + "name": "6cm",
191 + "lower_bound": 5650000000,
192 + "upper_bound": 5850000000
193 + },
194 + {
195 + "name": "3cm",
196 + "lower_bound": 10000000000,
197 + "upper_bound": 10500000000
198 + },
199 + {
200 + "name": "120m Broadcast",
201 + "lower_bound": 2300000,
202 + "upper_bound": 2495000
203 + },
204 + {
205 + "name": "90m Broadcast",
206 + "lower_bound": 3200000,
207 + "upper_bound": 3400000
208 + },
209 + {
210 + "name": "75m Broadcast",
211 + "lower_bound": 3900000,
212 + "upper_bound": 4000000
213 + },
214 + {
215 + "name": "60m Broadcast",
216 + "lower_bound": 4750000,
217 + "upper_bound": 4995000
218 + },
219 + {
220 + "name": "49m Broadcast",
221 + "lower_bound": 5900000,
222 + "upper_bound": 6200000
223 + },
224 + {
225 + "name": "41m Broadcast",
226 + "lower_bound": 7200000,
227 + "upper_bound": 7450000
228 + },
229 + {
230 + "name": "31m Broadcast",
231 + "lower_bound": 9400000,
232 + "upper_bound": 9900000
233 + },
234 + {
235 + "name": "25m Broadcast",
236 + "lower_bound": 11600000,
237 + "upper_bound": 12100000
238 + },
239 + {
240 + "name": "22m Broadcast",
241 + "lower_bound": 13570000,
242 + "upper_bound": 13870000
243 + },
244 + {
245 + "name": "19m Broadcast",
246 + "lower_bound": 15100000,
247 + "upper_bound": 15830000
248 + },
249 + {
250 + "name": "16m Broadcast",
251 + "lower_bound": 17480000,
252 + "upper_bound": 17900000
253 + },
254 + {
255 + "name": "15m Broadcast",
256 + "lower_bound": 18900000,
257 + "upper_bound": 19020000
258 + },
259 + {
260 + "name": "13m Broadcast",
261 + "lower_bound": 21450000,
262 + "upper_bound": 21850000
263 + },
264 + {
265 + "name": "11m Broadcast",
266 + "lower_bound": 25670000,
267 + "upper_bound": 26100000
268 + }
269 + ]

bookmarks.json(archivo creado)

@@ -0,0 +1,17 @@
1 + [
2 + {
3 + "name": "PY2KXK (Repetidora DMR)",
4 + "frequency": 145210000,
5 + "modulation": "dmr"
6 + },
7 + {
8 + "name": "PY2EXU (Rodada Alto Falante)",
9 + "frequency": 146410000,
10 + "modulation": "nfm"
11 + },
12 + {
13 + "name": "PY2KNF (Rep. Serra Cantareira)",
14 + "frequency": 147270000,
15 + "modulation": "nfm"
16 + }
17 + ]

config_webrx.py(archivo creado)

@@ -0,0 +1,247 @@
1 + # -*- coding: utf-8 -*-
2 +
3 + """
4 + config_webrx: configuration options for OpenWebRX
5 +
6 + This file is part of OpenWebRX,
7 + an open-source SDR receiver software with a web UI.
8 + Copyright (c) 2013-2015 by Andras Retzler <[email protected]>
9 + Copyright (c) 2019-2020 by Jakob Ketterl <[email protected]>
10 +
11 + This program is free software: you can redistribute it and/or modify
12 + it under the terms of the GNU Affero General Public License as
13 + published by the Free Software Foundation, either version 3 of the
14 + License, or (at your option) any later version.
15 +
16 + This program is distributed in the hope that it will be useful,
17 + but WITHOUT ANY WARRANTY; without even the implied warranty of
18 + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 + GNU Affero General Public License for more details.
20 +
21 + You should have received a copy of the GNU Affero General Public License
22 + along with this program. If not, see <http://www.gnu.org/licenses/>.
23 +
24 + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
25 +
26 + In addition, as a special exception, the copyright holders
27 + state that config_rtl.py and config_webrx.py are not part of the
28 + Corresponding Source defined in GNU AGPL version 3 section 1.
29 +
30 + (It means that you do not have to redistribute config_rtl.py and
31 + config_webrx.py if you make any changes to these two configuration files,
32 + and use them for running your web service with OpenWebRX.)
33 + """
34 +
35 + # configuration version. please only modify if you're able to perform the associated migration steps.
36 + version = 3
37 +
38 + # NOTE: you can find additional information about configuring OpenWebRX in the Wiki:
39 + # https://github.com/jketterl/openwebrx/wiki/Configuration-guide
40 +
41 + # ==== Server settings ====
42 + web_port = 8073
43 + max_clients = 20
44 +
45 + # ==== Web GUI configuration ====
46 + receiver_name = "PU2NVX"
47 + receiver_location = "São Paulo, Brasil"
48 + receiver_asl = 745
49 + receiver_admin = "[email protected]"
50 + receiver_gps = {"lat": -23.638, "lon": -46.645}
51 + photo_title = ""
52 + # photo_desc allows you to put pretty much any HTML you like into the receiver description.
53 + # The lines below should give you some examples of what's possible.
54 + #photo_desc = """
55 + #You can add your own background photo and receiver information.<br />
56 + #Receiver is operated by: <a href="mailto:openwebrx@localhost" target="_blank">Receiver Operator</a><br/>
57 + #Device: Receiver Device<br />
58 + #Antenna: Receiver Antenna<br />
59 + #Website: <a href="http://localhost" target="_blank">http://localhost</a>
60 + #"""
61 +
62 + # ==== Public receiver listings ====
63 + # You can publish your receiver on online receiver directories, like https://www.receiverbook.de
64 + # You will receive a receiver key from the directory that will authenticate you as the operator of this receiver.
65 + # Please note that you not share your receiver keys publicly since anyone that obtains your receiver key can take over
66 + # your public listing.
67 + # Your receiver keys should be placed into this array:
68 + receiver_keys = []
69 + # If you list your receiver on multiple sites, you can place all your keys into the array above, or you can append
70 + # keys to the arraylike this:
71 + # receiver_keys += ["my-receiver-key"]
72 +
73 + # If you're not sure, simply copy & paste the code you received from your listing site below this line:
74 +
75 + # ==== DSP/RX settings ====
76 + fft_fps = 15
77 + fft_size = 8192 # Should be power of 2
78 + fft_voverlap_factor = (
79 + 0.3 # If fft_voverlap_factor is above 0, multiple FFTs will be used for creating a line on the diagram.
80 + )
81 +
82 + audio_compression = "adpcm" # valid values: "adpcm", "none"
83 + fft_compression = "adpcm" # valid values: "adpcm", "none"
84 +
85 + # Tau setting for WFM (broadcast FM) deemphasis\
86 + # Quote from wikipedia https://en.wikipedia.org/wiki/FM_broadcasting#Pre-emphasis_and_de-emphasis
87 + # "In most of the world a 50 µs time constant is used. In the Americas and South Korea, 75 µs is used"
88 + # Enable one of the following lines, depending on your location:
89 + # wfm_deemphasis_tau = 75e-6 # for US and South Korea
90 + wfm_deemphasis_tau = 75e-6 # for the rest of the world
91 +
92 + digimodes_enable = True # Decoding digimodes come with higher CPU usage.
93 + digimodes_fft_size = 2048
94 +
95 + # determines the quality, and thus the cpu usage, for the ambe codec used by digital voice modes
96 + # if you're running on a Raspi (up to 3B+) you'll want to leave this on 1
97 + digital_voice_unvoiced_quality = 1
98 + # enables lookup of DMR ids using the radioid api
99 + digital_voice_dmr_id_lookup = True
100 +
101 + """
102 + Note: if you experience audio underruns while CPU usage is 100%, you can:
103 + - decrease `samp_rate`,
104 + - set `fft_voverlap_factor` to 0,
105 + - decrease `fft_fps` and `fft_size`,
106 + - limit the number of users by decreasing `max_clients`.
107 + """
108 +
109 + # ==== I/Q sources ====
110 + # (Uncomment the appropriate by removing # characters at the beginning of the corresponding lines.)
111 +
112 + ###############################################################################
113 + # Is my SDR hardware supported? #
114 + # Check here: https://github.com/jketterl/openwebrx/wiki/Supported-Hardware #
115 + ###############################################################################
116 +
117 + # Currently supported types of sdr receivers:
118 + # "rtl_sdr", "rtl_sdr_soapy", "sdrplay", "hackrf", "airspy", "airspyhf", "fifi_sdr",
119 + # "perseussdr", "lime_sdr", "pluto_sdr", "soapy_remote"
120 + #
121 + # In order to use rtl_sdr, you will need to install librtlsdr-dev and the connector.
122 + # In order to use sdrplay, airspy or airspyhf, you will need to install soapysdr, the corresponding driver, and the
123 + # connector.
124 + #
125 + # https://github.com/jketterl/owrx_connector
126 + #
127 + # In order to use Perseus HF you need to install the libperseus-sdr
128 + #
129 + # https://github.com/Microtelecom/libperseus-sdr
130 + #
131 + # and do the proper changes to the sdrs object below
132 + # (see also Wiki in https://github.com/jketterl/openwebrx/wiki/Sample-configuration-for-Perseus-HF-receiver).
133 + #
134 +
135 + sdrs = {
136 + "lmstcp": {
137 + "name": "LimeNET Micro",
138 + "type": "rtl_tcp",
139 + "ppm": 0,
140 + "profiles": {
141 + "144 MHz": {
142 + "device": "00001000",
143 + "remote": "10.10.5.191:1234",
144 + "rtltcp_compat": True,
145 + "always-on": True,
146 + "name": "Banda 2M (144MHz)",
147 + "center_freq": 146000000,
148 + "rf_gain": 10,
149 + "samp_rate": 4000000,
150 + "start_freq": 144000000,
151 + "start_mod": "nfm",
152 + },
153 + },
154 + },
155 + }
156 +
157 + # ==== Color themes ====
158 +
159 + ### google turbo colormap (see: https://ai.googleblog.com/2019/08/turbo-improved-rainbow-colormap-for.html)
160 + waterfall_colors = [0x30123b, 0x311542, 0x33184a, 0x341b51, 0x351e58, 0x36215f, 0x372466, 0x38266c, 0x392973, 0x3a2c79, 0x3b2f80, 0x3c3286, 0x3d358b, 0x3e3891, 0x3e3a97, 0x3f3d9c, 0x4040a2, 0x4043a7, 0x4146ac, 0x4248b1, 0x424bb6, 0x434eba, 0x4351bf, 0x4453c3, 0x4456c7, 0x4559cb, 0x455bcf, 0x455ed3, 0x4561d7, 0x4663da, 0x4666dd, 0x4669e1, 0x466be4, 0x466ee7, 0x4671e9, 0x4673ec, 0x4676ee, 0x4678f1, 0x467bf3, 0x467df5, 0x4680f7, 0x4682f9, 0x4685fa, 0x4587fc, 0x458afd, 0x448cfe, 0x448ffe, 0x4391ff, 0x4294ff, 0x4196ff, 0x3f99ff, 0x3e9bff, 0x3d9efe, 0x3ba1fd, 0x3aa3fd, 0x38a6fb, 0x36a8fa, 0x35abf9, 0x33adf7, 0x31b0f6, 0x2fb2f4, 0x2db5f2, 0x2cb7f0, 0x2ab9ee, 0x28bcec, 0x26beea, 0x25c0e7, 0x23c3e5, 0x21c5e2, 0x20c7e0, 0x1fc9dd, 0x1dccdb, 0x1cced8, 0x1bd0d5, 0x1ad2d3, 0x19d4d0, 0x18d6cd, 0x18d8cb, 0x18dac8, 0x17dbc5, 0x17ddc3, 0x17dfc0, 0x18e0be, 0x18e2bb, 0x19e3b9, 0x1ae5b7, 0x1be6b4, 0x1de8b2, 0x1ee9af, 0x20eaad, 0x22ecaa, 0x24eda7, 0x27eea4, 0x29efa1, 0x2cf09e, 0x2ff19b, 0x32f298, 0x35f394, 0x38f491, 0x3cf58e, 0x3ff68b, 0x43f787, 0x46f884, 0x4af980, 0x4efa7d, 0x51fa79, 0x55fb76, 0x59fc73, 0x5dfc6f, 0x61fd6c, 0x65fd69, 0x69fe65, 0x6dfe62, 0x71fe5f, 0x75ff5c, 0x79ff59, 0x7dff56, 0x80ff53, 0x84ff50, 0x88ff4e, 0x8bff4b, 0x8fff49, 0x92ff46, 0x96ff44, 0x99ff42, 0x9cfe40, 0x9ffe3e, 0xa2fd3d, 0xa4fd3b, 0xa7fc3a, 0xaafc39, 0xacfb38, 0xaffa37, 0xb1f936, 0xb4f835, 0xb7f835, 0xb9f634, 0xbcf534, 0xbff434, 0xc1f334, 0xc4f233, 0xc6f033, 0xc9ef34, 0xcbee34, 0xceec34, 0xd0eb34, 0xd2e934, 0xd5e835, 0xd7e635, 0xd9e435, 0xdbe236, 0xdde136, 0xe0df37, 0xe2dd37, 0xe4db38, 0xe6d938, 0xe7d738, 0xe9d539, 0xebd339, 0xedd139, 0xeecf3a, 0xf0cd3a, 0xf1cb3a, 0xf3c93a, 0xf4c73a, 0xf5c53a, 0xf7c33a, 0xf8c13a, 0xf9bf39, 0xfabd39, 0xfaba38, 0xfbb838, 0xfcb637, 0xfcb436, 0xfdb135, 0xfdaf35, 0xfeac34, 0xfea933, 0xfea732, 0xfea431, 0xffa12f, 0xff9e2e, 0xff9c2d, 0xff992c, 0xfe962b, 0xfe932a, 0xfe9028, 0xfe8d27, 0xfd8a26, 0xfd8724, 0xfc8423, 0xfc8122, 0xfb7e20, 0xfb7b1f, 0xfa781e, 0xf9751c, 0xf8721b, 0xf86f1a, 0xf76c19, 0xf66917, 0xf56616, 0xf46315, 0xf36014, 0xf25d13, 0xf05b11, 0xef5810, 0xee550f, 0xed530e, 0xeb500e, 0xea4e0d, 0xe94b0c, 0xe7490b, 0xe6470a, 0xe4450a, 0xe34209, 0xe14009, 0xdf3e08, 0xde3c07, 0xdc3a07, 0xda3806, 0xd83606, 0xd63405, 0xd43205, 0xd23105, 0xd02f04, 0xce2d04, 0xcc2b03, 0xca2903, 0xc82803, 0xc62602, 0xc32402, 0xc12302, 0xbf2102, 0xbc1f01, 0xba1e01, 0xb71c01, 0xb41b01, 0xb21901, 0xaf1801, 0xac1601, 0xaa1501, 0xa71401, 0xa41201, 0xa11101, 0x9e1001, 0x9b0f01, 0x980d01, 0x950c01, 0x920b01, 0x8e0a01, 0x8b0901, 0x880801, 0x850701, 0x810602, 0x7e0502, 0x7a0402]
161 +
162 + ### original theme by teejez:
163 + #waterfall_colors = [0x000000, 0x0000FF, 0x00FFFF, 0x00FF00, 0xFFFF00, 0xFF0000, 0xFF00FF, 0xFFFFFF]
164 +
165 + ### old theme by HA7ILM:
166 + #waterfall_colors = [0x000000, 0x2e6893, 0x69a5d0, 0x214b69, 0x9dc4e0, 0xfff775, 0xff8a8a, 0xb20000]
167 + # waterfall_min_level = -115 #in dB
168 + # waterfall_max_level = 0
169 + # waterfall_auto_level_margin = {"min": 20, "max": 30}
170 + ##For the old colors, you might also want to set [fft_voverlap_factor] to 0.
171 +
172 + waterfall_min_level = -88 # in dB
173 + waterfall_max_level = -20
174 + waterfall_auto_level_margin = {"min": 3, "max": 10, "min_range": 50}
175 +
176 + # Note: When the auto waterfall level button is clicked, the following happens:
177 + # [waterfall_min_level] = [current_min_power_level] - [waterfall_auto_level_margin["min"]]
178 + # [waterfall_max_level] = [current_max_power_level] + [waterfall_auto_level_margin["max"]]
179 + #
180 + # ___|________________________________________|____________________________________|________________________________________|___> signal power
181 + # \_waterfall_auto_level_margin["min"]_/ |__ current_min_power_level | \_waterfall_auto_level_margin["max"]_/
182 + # current_max_power_level __|
183 +
184 + # === Experimental settings ===
185 + # Warning! The settings below are very experimental.
186 + csdr_dynamic_bufsize = False # This allows you to change the buffering mode of csdr.
187 + csdr_print_bufsizes = False # This prints the buffer sizes used for csdr processes.
188 + csdr_through = False # Setting this True will print out how much data is going into the DSP chains.
189 +
190 + nmux_memory = 50 # in megabytes. This sets the approximate size of the circular buffer used by nmux.
191 +
192 + google_maps_api_key = "--------"
193 +
194 + # how long should positions be visible on the map?
195 + # they will start fading out after half of that
196 + # in seconds; default: 2 hours
197 + map_position_retention_time = 2 * 60 * 60
198 +
199 + # decoder queue configuration
200 + # due to the nature of some operating modes (ft8, ft8, jt9, jt65, wspr and js8), the data is recorded for a given amount
201 + # of time (6 seconds up to 2 minutes) and decoded at the end. this can lead to very high peak loads.
202 + # to mitigate this, the recordings will be queued and processed in sequence.
203 + # the number of workers will limit the total amount of work (one worker will losely occupy one cpu / thread)
204 + decoding_queue_workers = 6
205 + # the maximum queue length will cause decodes to be dumped if the workers cannot keep up
206 + # if you are running background services, make sure this number is high enough to accept the task influx during peaks
207 + # i.e. this should be higher than the number of decoding services running at the same time
208 + decoding_queue_length = 10
209 +
210 + # wsjt decoding depth will allow more results, but will also consume more cpu
211 + wsjt_decoding_depth = 3
212 + # can also be set for each mode separately
213 + # jt65 seems to be somewhat prone to erroneous decodes, this setting handles that to some extent
214 + wsjt_decoding_depths = {"jt65": 1}
215 +
216 + # JS8 comes in different speeds: normal, slow, fast, turbo. This setting controls which ones are enabled.
217 + js8_enabled_profiles = ["normal", "slow"]
218 + # JS8 decoding depth; higher value will get more results, but will also consume more cpu
219 + js8_decoding_depth = 3
220 +
221 + temporary_directory = "/tmp/openwebrx"
222 +
223 + services_enabled = True
224 + services_decoders = ["ft8", "ft4", "wspr", "packet"]
225 +
226 + # === aprs igate settings ===
227 + # if you want to share your APRS decodes with the aprs network, configure these settings accordingly
228 + aprs_callsign = "PU2NVX"
229 + aprs_igate_enabled = True
230 + aprs_igate_server = "soam.aprs2.net"
231 + aprs_igate_password = "---------"
232 + # beacon uses the receiver_gps setting, so if you enable this, make sure the location is correct there
233 + aprs_igate_beacon = True
234 +
235 + # path to the aprs symbols repository (get it here: https://[email protected]/hessu/aprs-symbols)
236 + aprs_symbols_path = "/opt/aprs-symbols/png"
237 +
238 + # === PSK Reporter setting ===
239 + # enable this if you want to upload all ft8, ft4 etc spots to pskreporter.info
240 + # this also uses the receiver_gps setting from above, so make sure it contains a correct locator
241 + pskreporter_enabled = False
242 + pskreporter_callsign = "PU2NVX"
243 +
244 + # === Web admin settings ===
245 + # this feature is experimental at the moment. it should not be enabled on shared receivers since it allows remote
246 + # changes to the receiver settings. enable for testing in controlled environment only.
247 + webadmin_enabled = False
Siguiente Anterior

Desarrollado por Opengist ⋅ Load: 36ms⋅

Español