racerxdl / hc06config.ino

/* HC-06 Module Configurator This Arduino Code Configures the Baudrate, name and PIN to a HC-06 Bluetooth module on Serial port 0 By: Lucas Teske */ #define BAUDRATE 115200 // Valid values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. // Default: 9600 void setup() { //Initialize serial and wait for port to open: Serial.begin(9600); while (!Serial) { ; // wait for serial port to connect. Needed for Leonardo only } // Change mybt to your device name, and 1234 to your pin Serial.write("AT+NAMEmybt"); delay(1000); Serial.write("AT+PIN1234"); delay(1000); switch(BAUDRATE) { case 1200: Serial.write("AT+BAUD1"); break; case 2400: Serial.write("AT+BAUD2"); break; case 4800: Serial.write("AT+BAUD3"); break; case 9600: Serial.write("AT+BAUD4"); break; case 19200: Serial.write("AT+BAUD5"); break; case 38400: Serial.write("AT+BAUD6"); break; case 57600: Serial.write("AT+BAUD7"); break; case 115200: Serial.write("AT+BAUD8"); break; default: Serial.write("AT+BAUD4"); break; } delay(1000); } void loop() { }