Ревізії hc06config.ino

1 file changed, 41 insertions

hc06config.ino(файл створено)

		@@ -0,0 +1,41 @@
1	+	/*
2	+	HC-06 Module Configurator
3	+
4	+	This Arduino Code Configures the Baudrate, name and PIN to a HC-06 Bluetooth module on Serial port 0
5	+
6	+
7	+	By: Lucas Teske
8	+	*/
9	+
10	+	#define BAUDRATE 115200 // Valid values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
11	+	// Default: 9600
12	+
13	+	void setup() {
14	+	//Initialize serial and wait for port to open:
15	+	Serial.begin(9600);
16	+	while (!Serial) {
17	+	; // wait for serial port to connect. Needed for Leonardo only
18	+	}
19	+	// Change mybt to your device name, and 1234 to your pin
20	+	Serial.write("AT+NAMEmybt");
21	+	delay(1000);
22	+	Serial.write("AT+PIN1234");
23	+	delay(1000);
24	+	switch(BAUDRATE) {
25	+	case 1200: Serial.write("AT+BAUD1"); break;
26	+	case 2400: Serial.write("AT+BAUD2"); break;
27	+	case 4800: Serial.write("AT+BAUD3"); break;
28	+	case 9600: Serial.write("AT+BAUD4"); break;
29	+	case 19200: Serial.write("AT+BAUD5"); break;
30	+	case 38400: Serial.write("AT+BAUD6"); break;
31	+	case 57600: Serial.write("AT+BAUD7"); break;
32	+	case 115200: Serial.write("AT+BAUD8"); break;
33	+	default: Serial.write("AT+BAUD4"); break;
34	+	}
35	+	delay(1000);
36	+	}
37	+
38	+
39	+	void loop() {
40	+
41	+	}

Новіше Пізніше